Schumacher XP500 Instant Portable Power Source

Schumacher XP500 Instant Portable Power Source Review

Schumacher XP500 Instant Portable Power Source Feature

• On/Off switch activates the jump starting mode
• Built-in charger for automatic charging of internal battery
• Battery status LEDs tells when battery is charged or needs to be charged
• Sure-Grip clamps fit both top and side-mount batteries
• A maintenance-free, sealed lead acid battery allow for storage in any position

This Schumacher Instant Portable Power Source has an on/off switch that activates the jump start mode. A built-in charger for automatic charging of the internal battery; just connect an extension cord to the plug to recharge (cord not included). The battery status LEDs tell when a battery is charged or needs to be charged. The Sure-Grip Clamps fit both top and side-mount batteries. The cable will stay flexible in the coldest weather. A maintenance-free, sealed lead acid battery allow for storage in any position.

Schumacher XM1-5 1.5 Amp Fully Automatic Power Charger and Maintainer

Schumacher XM1-5 1.5 Amp Fully Automatic Power Charger and Maintainer Review

Schumacher XM1-5 1.5 Amp Fully Automatic Power Charger and Maintainer Feature

• Great for maintaining small and large batteries kept in storage such as motorcycles, classic cars, RVs, boats and more
• Unique automatic battery charger maintains both 6 and 12 volt batteries keeping them at full charge using float-mode monitoring
• LEDs indicate Connected, Charging and Charged
• Reverse-hookup protection
• The charger automatically determines whether the connected battery is a 6 volt battery or a 12 volt battery

This fully automatic microprocessor controlled, unique automatic battery charger maintains both 6 volt and 12 volt batteries keeping them at full charge using float-mode monitoring. Great for maintaining small and large batteries kept in storage such as motorcycles, classic cars, RVs and boats. This 1.5 ampere charger and maintainer is perfect for charging small batteries. LEDs indicate Connected, Charging and Charged. It automatically switches from full charge to float-mode monitoring. The quick-disconnect harness snaps either connector into place in seconds and can be used with the 50 ampere clamps or permanently attach the ring connectors; this is great for hard-to-reach motorcycle batteries. Reverse-hookup protection increases safety. The auto voltage detection means the charger automatically determines whether the connected battery is a 6 volt battery or a 12 volt battery.

Schumacher XC75 SpeedCharge Battery Charger with Engine Start

Schumacher XC75 SpeedCharge Battery Charger with Engine Start Review

Schumacher XC75 SpeedCharge Battery Charger with Engine Start Feature

• 75 ampere engine start for emergency starting
• Self-adjusting, variable charge rates for everyday charging needs and maintaining your battery in peak condition
• Charges and automatically desulfates and restores car, truck, RV, farm equipment, AGM, gel cell and deep-cycle batteries
• 3 amp maintain / 5 amp slow / 10-20 amp fast charge
• The charger automatically determines whether the connected battery is a 6 volt battery or a 12 volt battery

This fully automatic microprocessor controlled 75 ampere engine start is perfect for emergency starting. It features a 5 ampere slow charge, and a 10-20 ampere fast charge, which has self-adjusting, variable charge rates for everyday charging needs and maintaining your battery in peak condition. Charges and automatically desulfates and restores car, truck, RV, farm equipment, AGM, gel cell and deep-cycle batteries. A secondary feature is the 3 ampere slow charge for charging and maintaining small batteries, motorcycle batteries, ATV batteries, snowmobile batteries and lawn tractor batteries. With a built-in digital voltmeter/tester, you can easily diagnose problems. An auto voltage detection means the charger automatically determines whether the connected battery is a 6 volt battery or a 12 volt battery.

CTEK UC 800 6V Smart Battery Charger

CTEK UC 800 6V Smart Battery Charger Review

CTEK UC 800 6V Smart Battery Charger Feature

• Includes two interchangeable connection leads, one with clamps, and one with eyelet terminals; 5 year limited warranty
• Four step, automatic switch charging, that allows for easy, convenient, no-watch battery charging
• Charges 6-volt lead-acid batteries (Wet, MF, Gel and AGM) from 2Ah to 32Ah (charging), 12-100Ah (maintenance)
• Maintenance pulse charging increases battery life and gives superb performance, and patented desulphation functionality allows for the recovery of slightly sulphated batteries
• Compact design with mounting holes allows for permanent assembly, and the charger to be connected for months, makes this charger ideal for vintage cars, motorcycles, other vehicles with 6V batteries up to 100Ah

CTEK Power's UC 800 is a switch mode battery charger, with pulse maintenance and is a part of a series of professional battery chargers from CTEK Sweden AB. These chargers represent the latest technology within battery charging. A recent addition to the CTEK family of "the smartest battery chargers in the world," the UC 800 automatically and easily charges all smaller 6V lead-acid batteries, making it perfect for vintage cars, motorcycles and other 6V vehicles up to 100Ah. Four-step Automatic Battery Charging Cycle There is no need for any specific knowledge of batteries or their charging methods; the UC 800 will take care of it. The UC 800 utilizes a four-step fully automatic charging cycle. First, patented desulphation functionality allows for possible reconditioning of batteries that have lost power due nonuse. This is followed by Bulk Charging, when 80% of charging takes place; then Absorption Charging which completes charging up to virtually 100%; and finally Pulse/Maintenance Charging, in which the battery receives a pulse of electricity when the voltage drops below 95%, keeping the battery in perfect condition indefinitely when it is not used. If the battery is loaded and the battery’s terminal voltage drops to 12.9V the charger automatically switches back to the beginning of the four-step cycle. Also, the UC 800 can be connected for months and it is specifically developed for seasonal vehicles. Safe, automatic charging suitable for all-weather conditions. View larger. 4-step battery charging explained. View larger. Charger includes alligator clips with cables for instant connections, and a set of battery cables with eyelet terminals for semi-permanent installation. View larger. Charging for All-weather Conditions A very light and compact charger, but still extremely robust and water and dust resistant (IP65 classification), the UC 800 is designed to charge and maintain batteries, no matter the weather, temperature or situation. The UC 800 is certified for use between –4°F and +122°F. In order to make things easier and more convenient, the Comfort Connect (eyelet terminals) can be permanently connected to the vehicle’s battery. Designed for Safety and Compatibility All CTEK models are designed to consider the safety of the user. They are spark free, making the connection much easier and safer, considering the gases batteries normally produce. The UC 800 is also protected from reverse-polarity connections and is short-circuit proof. A red light on the charger will simply indicate that the charging cannot begin until the user has connected the charger correctly. In addition, unlike less-sophisticated chargers, there is no need to disconnect the battery from the overall vehicle system since the UC 800 is specially designed to not damage electronic systems. Key Features: Four step, automatic switch charging, with patented desulfation functionality to recondition many batteries that have lost power due to non use. Charges 6-volt lead-acid batteries (Wet, MF, Gel and AGM) from 2Ah to 32Ah (charging), 1.2-100Ah (maintenance). Maintenance pulse charging increases battery life and gives superb performance. Pulse recovery of slightly sulphated batteries. Low back current drain, low ripple and input voltage independent. Delivered with two interchangeable connection leads, one with clamps, and one with eyelet terminals. The charger can be connected for months, ideal for seasonal vehicles, and compact design with mounting holes allows for permanent assembly. 5 year limited warranty. The CTEK Battery Charger Line   US 800 UC 800 Multi US 3300 Multi US 7002 Input voltage AC: 100–120VAC, 50–60Hz 100–120VAC, 50–60Hz 100–120VAC, 50–60Hz 100–120VAC, 50–60Hz Output voltage: Nominal:12V Nominal: 6V Nominal:12V Nominal:12V Efficiency: High 85% High 85% High 85% High 85% Charging voltage: 14.4V 7.2V 14.4V/14.7V 14.4V/14.7V Charging current: 0.8A max 0.8A max 0.8/3.3A max 7A max Back current drain*: <1mAh <1mAh <1Ah per month <1Ah per month Ripple**: ~2% ~2% ~2% ~4% Ambient temperature: -4°F to +122°F -4°F to +122°F -4°F to +122°F -4°F to +122°F Type of charger: 4 step, fully automatic switch mode with pulse maintenance 4 step, fully automatic switch mode with pulse maintenance 4 step, fully automatic switch mode with pulse maintenance 8–step, fully automatic switch mode with float pulse/maintenance Type of batteries: 12V lead-acid batteries (Wet, MF, AGM and most GEL) 6V lead-acid batteries (Wet, MF, AGM and most GEL) 12V lead-acid batteries (Wet, MF, AGM, GEL and Ca) 12V lead-acid batteries (Wet, MF, AGM, GEL and Ca) Battery capacity: 1.2–32Ah (charging) 1.2–100Ah (maintenance) 1.2–32Ah (charging) 1.2–100Ah (maintenance) 1.2–75Ah (charging) 1.2–120Ah (maintenance) 14-150Ah (charging) 14-225Ah (maintenance) Dimensions (L x W x H): 5½ x 2 x 1½ inches 5½ x 2 x 1½ inches 6½ x 2⅜ x 1½ inches 8½ x 3½ x 1⅞ inches Insulation class: IP65 (splash and dust proof) IP65 (splash and dust proof) IP65 (splash and dust proof) IP65 (splash and dust proof) Weight: 0.7lbs 0.7lbs 1.1lbs 1.7lbs * Back current drain is what drains the battery if the charger is connected without the power cord connected. ** Ripple describes the quality of the current and voltage. A high current ripple heats the battery and shortens its life. A linear charger has a current ripple of 70–400% which is much larger than the maximum 5% for a modern sealed battery. High voltage ripple could harm other equipment that is connected to the battery. UC 800 delivers voltage and current with very low ripple. The battery has a long service life and there is no risk of damage to other electronic devices connected to the battery. What's in the Box 1-CTEK UC 800 6V battery charger, 1-set of battery cables with battery terminal clips, 1-set of battery cables with eyelet terminals, detailed instructions. 5-Year Limited Warranty CTEK Sweden AB, provides a 5-year limited, nontransferable warranty issued from the date of purchase to the original purchaser of this product against defects in workmanship or materials. About CTEK Power, Inc. CTEK Power Inc. designs and develops a unique series of battery chargers and special solutions for all types of lead-acid batteries for both personal and professional use. Safety, simplicity and flexibility are key words and requirements that apply to all the products and solutions developed and sold by CTEK. CTEK has sold more than two million battery chargers worldwide, and has its own operations in the US and China, with main and development offices are located in Vikmanshyttan, Dalarna, Sweden.

The CTEK UC 800 is the charger that can give your old car a new life. A complete 6V battery charger in a diminutive format that charges everything from 1.2-100Ah. The UC 800 has a 5 year warranty, delivers 0.8-Ampere and is IP65 classified (Splash and dust proof). All CTEK battery chargers are electronic proof, non-sparking and reverse polarity and short circuit proof. IP 65. 110 Volt. Capacity 1.2-100 Ah. Charging current 0.8A. Dimensions 5 5/8-inch x 2-inch x 1 3/8-inch. Weight 0.7 pounds.

Schumacher SE-6030 Manual Wheel Charger

Schumacher SE-6030 Manual Wheel Charger Review

Schumacher SE-6030 Manual Wheel Charger Feature

• Helps in fleet operations and industrial use
• Has durable construction with tubular handle
• Accommodates both 6 and 12-volt batteries
• 4 amp slow charge charges a small 12V battery in 1-5 hrs
• Equipped with cooling fan for high-performance and long life

This manual wheel charger is a heavy-duty model which is ideal for big fleet operations and industrial use. It is perfect for situations which need a lot of power including diesel engines. The very high output engine start assists batteries in cranking most engines under severe weather conditions. It is ideal for 6 and 12-volt batteries and its 300-amps help engines for emergency starting. It has a 60-amp fast charge which helps to charge a battery in 1-3 hours and a 4 amp slow charge which charges a small 12V battery in 1-5 hrs. It is equipped with a cooling fan for high-performance and long life.

Battery Tender 800 Waterproof 12V Battery Charger

Battery Tender 800 Waterproof 12V Battery Charger Review

Battery Tender 800 Waterproof 12V Battery Charger Feature

• Spark proof and reverse polarity protected; protected by a 3-year limited warranty
• Designed for use on all AGM sealed maintenance free, lead calcium, and flooded batteries
• 100% waterproof and ultraportable at a size not bigger than a computer mouse
• Complete 3-step charging program (initialization, bulk charge, and float mode) for maintaining optimal performance levels without over charging
• Automatically switches to float/maintenance voltage after fully charging the battery

The Battery Tender Waterproof 800 12-volt/.80-amp Battery Charger is the ultraportable solution to the challenge of keeping vehicle batteries optimally powered when not in use, and in situations where water may be present. It is able to charge any lead-acid battery, including standard and sealed AGM and GEL Cell battery types, and is also designed to be easy to use in small spaces, to utilize a 3-step charging program and safely function in a fully automatic mode. Taken together this makes the Waterproof 800 an excellent means of ensuring that the batteries for your ATV's, watercraft, motorcycles and boats are fully and safely charged and ready to go when you are. 3-step charging with automatic float mode. View larger. Completely waterproof and ultraportable. View larger. Charges all lead acid battery types. View larger. Safe, 3-step Battery Charging The engineers at Deltran led the way in innovation and convenience by introducing the International Battery Tender Waterproof 800. Since its introduction in 2003, it has been widely accepted as a solid new addition to the Battery Tender family of charger products. This compact 800 mA battery charger has all the charge characteristics of its cousin the Battery Tender Junior. It incorporates highly efficient surface mount technology electronic components. The interior is completely encapsulated, protected from shock, vibration, and moisture by an electrically insulating, thermally conductive, flame retardant, UL recognized, synthetic epoxy resin compound. It's tough, affordable, and a strong, innovative battery charging solution. This charger is no larger than a standard computer mouse yet packs 800 millamps of pure constant current charging power. Coupled with a "brain" (IC chip) and a 3-step charging system that constantly cycles through monitoring, charging, and then maintaining your battery--even while totally submersed under water--it's perfect for all outdoor types of ATV's, watercraft, motorcycles, boats, or anywhere water is a threat. Key Features: 100% waterproof. Complete 3-step charging program (initialization, bulk charge, and float mode). Automatically switches to float / maintenance voltage after fully charging the battery. 12v-800mA "Super Smart" technology. Spark proof and reverse polarity protected. Designed for use on all AGM sealed maintenance free, lead calcium, and flooded batteries. Three year warranty. Charger Models Output Voltage Output Current Charging Software*/ Battery Type AC Voltage/ Frequency Input (Volts) (Amps) Battery Tender Junior 6V Battery Charger 6V 0.750A 3 Step STD & AGM 120 VAC, 60 Hz Battery Tender Junior 12V Battery Charger 12V 0.750A 4 Step STD & AGM 120 VAC, 60 Hz Waterproof 800 12V Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender Plus 6V Battery Charger 6V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger 12V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger (Gel Cell) 12V 1.25A 4 Step STD & AGM or GEL 120 VAC, 60 Hz Battery Tender Twin 800 12V Dual Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 2-Bank Battery Management System 12V 1.25A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 4-Bank Battery Management System 12V 1.25A 4 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 5-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz Battery Tender 12V 10-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz *Note: All Deltran battery chargers will charge all types of lead acid batteries: either flooded (standard STD), sealed maintenance free Absorbed Glass Mat (AGM), or sealed maintenance free gelled electrolyte (GEL) batteries. However, for optimum battery performance in deep cycle applications (for example, running a trolling motor), it is best to chose the Deltran charger that has the charging software specifically designed for the battery type. Fortunately, since the technical staff at Deltran has developed charging software that works equally well for both STD & AGM batteries, the only choice to be made is between 2 models: either STD & AGM or GEL software. Three-year Limited Warranty Deltran provides a limited three-year warranty on its Battery Tender Waterproof 800 12-volt/.80-amp Battery Charger to the original purchaser based on defective material or workmanship. Warranty is void in cases of product misuse, disassembly or modification. Other details regarding warranty limitations and procedures are contained in the Deltran Battery Tender Charger's general limited warranty information sheet enclosed with this product.

Battery Tender Waterproof 800 12V Battery Charger is a compact 800 milliamp battery charger that has all the charge characteristics of its cousin the Battery Tender Junior. It incorporates highly efficient surface mount technology electronic components. The interior is completely encapsulated, protected from shock, vibration, and moisture by an electrically insulating, thermally conductive, flame retardant, UL recognized, synthetic epoxy resin compound. It is tough, affordable, and a strong, innovative battery charging solution and is no larger than a standard computer mouse yet packs 800 millamp of pure constant current charging power. Coupled with a brain which is the IC chip, the charger will constantly monitor, charge, and then maintain the battery even while totally submersed under water. It is perfect for all outdoor types of ATVs, watercraft, motorcycles, boats, or anywhere where water is a threat. This unit will work anywhere in the world with an international universal input range of 100-240 AC volt at 50/60 Hertz. An optional 25 feet extension cord (part number 081-0148-25) is sold separately.

Schumacher PSC-12500A DSR ProSeries 125/15-40/2 Amp 6/12 Volt Automatic SpeedCharge Hybrid Battery Charger/Starter

Schumacher PSC-12500A DSR ProSeries 125/15-40/2 Amp 6/12 Volt Automatic SpeedCharge Hybrid Battery Charger/Starter Review

Schumacher PSC-12500A DSR ProSeries 125/15-40/2 Amp 6/12 Volt Automatic SpeedCharge Hybrid Battery Charger/Starter Feature

• Charges 6 and 12 Volt batteries
• For 12 Volt regular automotive, deep-cycle, AGM/Gel Cell, and 6 Volt regular batteries
• Fully automatic and microprocessor controlled
• 125 ampere 12 Volt engine start - for emergency starting
• 15 to 40 ampere 6 and 12 Volt rapid charge with self-adjusting, variable charge rates and float-mode monitoring

Schumacher's PSC-12500A Auto Speed Charge Hybrid Battery Charger with Engine Start charges 6 and 12 Volt batteries, with 15-40 ampere self-adjusting, variable charge rates and float-mode monitoring. There is also a 2 ampere trickle charge rate for small 12 Volt batteries, and a 125 ampere emergency start charge. This Charger/Starter is fully automatic with a built-in digital Volt meter and alternator tester.

Schumacher BT-100 100 amp Battery Load Tester

Schumacher BT-100 100 amp Battery Load Tester Review

Schumacher BT-100 100 amp Battery Load Tester Feature

• 100 amp load test – for 12 volt batteries, 50 amp load test – for 6 volt batteries
• Tests 6 and 12 volt batteries – up to 1000 CCA
• Test load, battery condition, starter motor draw and complete charging system diagnosis

The Schumacher BT-100 100-Amp Batter Load Tester is great for everyday use on 6V and 12V batteries. It can test load, battery condition, starter motor draw, and offers complete charging system diagnosis. Its shock-resistant meter is housed in a sturdy steel case that has a durable baked enamel finish. It also features a rubber insulated carry handle for your safety. The BT-100 comes equipped with super-grip battery clamps and a top-mounted rocker switch, making it very easy to use.

BatteryMINDer 12 Volt 1.5A OnBoard Battery Charger/Maintainer, Desulfator, Conditioner

BatteryMINDer 12 Volt 1.5A OnBoard Battery Charger/Maintainer, Desulfator, Conditioner Review

BatteryMINDer 12 Volt 1.5A OnBoard Battery Charger/Maintainer, Desulfator, Conditioner Feature

• 12 Volt 1.5 Amp

12 Volt 1.5 Amp Charger / Maintainer / Desulfator / Conditioner BatteryMINDer Model 12151 onboard battery charger/maintainer/desulfator mounts easily under the hood or to the side of batteries while it is installed. 100% waterproof unit charges and maintains 12V auto, truck, boat, ATV and PWC ride-on batteries. It features simple operation with easy 2-wire connection to battery terminals; just plug into an extension cord and you are ready. Desulfates older batteries and prevents damaging sulfate in newer batteries, extending battery life. Works with gel and SLA 12V batteries; not suitable for aircraft batteries. Includes universal mounting bracket. CSA and UL listed. The BatteryMINDer automatically dissolves power-robbing sulfation crystals using safe, low voltage, high frequency U.S. Patented pulse technology. FREE battery condition indicator (.95 retail value) , with instant pushbutton LED read-out, when you register your warranty on the manufacturer's web site. Simple connection to any type 12 volt battery. Battery Condition Indicator Model 12103 Included Accessories: BatteryMINDer 12151 with built in ring terminals and power cord Mounting Bracket and hardware Easy to Mount and Use Attach charger to mounting bracket, using the included bracket and hardware. Attach the red charger terminal to the positive battery post and black charger terminal to negative post.

Schumacher SE-1072 Multi-Battery Charger

Schumacher SE-1072 Multi-Battery Charger Review

Schumacher SE-1072 Multi-Battery Charger Feature

• Can charge six 12-volt or twelve 6-volt batteries
• Includes charger and 5 jumpers for connecting batteries in series
• Fuse protects against overload and short-circuits
• Ideal for low-rider cars or fleet and industrial operations
• Charger dimensions measure 13 1/2"w x 11"h with a 13" diameter

This multi-battery charger can charge up to 12 batteries simultaneously and is ideal wherever charging multiple batteries is the norm. Its dimensions measure 13 1/2"w x 11"h with a 13 diameter. It is completely portable with 72-volts and includes a charger and 5 jumpers for connecting batteries in a series. It has the capability to charge six 12-volt batteries or twelve 6-volt batteries and a fuse protects against overload and short-circuits. It is ideal for low-rider cars or fleet and industrial operations and is perfect for those applications where portability is a must.

Battery Tender 021-0134 10-Bank 12V Battery Management System

Battery Tender 021-0134 10-Bank 12V Battery Management System Review

Battery Tender 021-0134 10-Bank 12V Battery Management System Feature

• Simultaneously charges and/or maintains up to 10 12-volt batteries, providing 12 volts/2 amps per charging bank
• Includes six foot lead with aligator clamps and a 3-year warranty
• Complete 4-step charging program (initialization, bulk charge, absorption mode and float mode) that maintains batteries at full charge without overcharging via its 4-step charging system
• Spark-free design via microchip circuitry that will not activate output voltage until clips are correctly connected to battery
• Reverse polarity protection and a built-in 72-hour safety timer ensures batteries attain float mode status

The Battery Tender 12-volt/2-amp 10-Bank Battery Management System is designed for commercial use in keeping up to 10 12-volt batteries simultaneously charged and maintained, each at its proper storage voltage without the damaging effects caused by some trickle chargers. Compatible with all AGM (absorbed glass mat), sealed maintenance free and flooded batteries commonly found in everything from some automotive/farm equipment to motorcycles, ATV’s, and personal watercraft, this lightweight, microprocessor controlled unit provides safe, constant, 4-step charging current for every vehicle stored in your shop. Simultaneous charging of up to 10 separate batteries. View larger. The 4-step charge cycle detailed. View larger. Smart, Commercial Grade 4-step Battery Charging The first fully automatic, constant-current battery charger designed to charge and/or maintain up to 10 12-volt batteries simultaneously at 2 amps, the Battery Tender 12-volt/2-amp 10-Bank Battery Management System utilizes a 4-step charging program (initialization, bulk charge, absorption mode and float mode), that allows users to connect the charger to up to 10 batteries, either in or out of a vehicle, with the confidence that all are being maintained at optimal performance levels. This makes it extremely useful for battery rotation, where a battery is removed from service during repair or in preparing batteries for sale. It is also safe for your batteries, with the built-in ability to automatically switch its output voltage to a storage or float level that eliminates the need to worry about the damaging effects of overcharging, and the resulting need to check on the condition of a charging battery. If or when the battery voltage drops too far under load, this same smart technology resumes output power and the charging cycle begins again. The unit also features sparkproof connectors, reverse polarity protection, a 72-hour safety timer that ensures batteries attain float mode status during charging, an easy to understand charging status LED indicator for each charging bank, durable construction and almost no current draw from batteries connected to it. Key Features: Simultaneously charges and/or maintains up to 10 12-volt batteries. 12 volts/2 amps per charging bank. Maintains batteries at full charge without overcharging via its 4-step charging system. Spark-free design via microchip circuitry that will not activate output voltage until clips are correctly connected to battery. Reverse polarity protection and a built-in 72-hour safety timer that ensures batteries attain float mode status. Six foot lead with alligator clamps included. 3-year warranty. Charger Models Output Voltage Output Current Charging Software*/ Battery Type AC Voltage/ Frequency Input (Volts) (Amps) Battery Tender Junior 6V Battery Charger 6V 0.750A 3 Step STD & AGM 120 VAC, 60 Hz Battery Tender Junior 12V Battery Charger 12V 0.750A 4 Step STD & AGM 120 VAC, 60 Hz Waterproof 800 12V Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender Plus 6V Battery Charger 6V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger 12V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger (Gel Cell) 12V 1.25A 4 Step STD & AGM or GEL 120 VAC, 60 Hz Battery Tender Twin 800 12V Dual Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 2-Bank Battery Management System 12V 1.25A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 4-Bank Battery Management System 12V 1.25A 4 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 5-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz Battery Tender 12V 10-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz *Note: All Deltran battery chargers will charge all types of lead acid batteries: either flooded (standard STD), sealed maintenance free Absorbed Glass Mat (AGM), or sealed maintenance free gelled electrolyte (GEL) batteries. However, for optimum battery performance in deep cycle applications (for example, running a trolling motor), it is best to chose the Deltran charger that has the charging software specifically designed for the battery type. Fortunately, since the technical staff at Deltran has developed charging software that works equally well for both STD & AGM batteries, the only choice to be made is between 2 models: either STD & AGM or GEL software. Three-year Limited Warranty Deltran provides a limited three-year warranty on its Battery Tender 12-volt/2-amp 10-Bank Battery Management System to the original purchaser based on defective material or workmanship. Warranty is void in cases of product misuse, disassembly or modification. Other details regarding warranty limitations and procedures are contained in the Deltran Battery Tender Charger's general limited warranty information sheet enclosed with this product.

The Battery Tender 10-Bank charger is a top-of-the-line 12 volt 2.0 amp per circuit charger, perfect for automotive, motorcycle and marine repair and maintainence shops. The 10-Bank uses micro-processor technology in a four-stage charging profile to charge, improve, and float the battery so it is ready when you are. Constant current charging and regulated voltage patterns allow the battery to be recharged fully and safely without the fear of overcharging. The lights above each station indicate the stage of charge so there is no guesswork in the shop. The 10-Bank BatteryTender is used in battery rotation, when a battery is removed from service during repair or in preparing batteries for sale.

Schumacher INC-2405 Automatic Microprocessor Charger

Schumacher INC-2405 Automatic Microprocessor Charger Review

Schumacher INC-2405 Automatic Microprocessor Charger Feature

• 5 Amp, 24 volt fully automatic microprocessor controlled charger
• Multi-stage charging algorithm offers a safe start, reverse polarity and short circuit protection
• Maintenance mode monitors the battery voltage to keep it fully charged
• Perfect for mobilized wheelchairs, electric scooters, hospital beds and other battery powered devices with hard-to-access batteries
• A heavy duty aluminum case weighs less than 2 pounds

This is a 5 Amp, 24 volt fully automatic microprocessor controlled charger designed to be mounted to a flat surface. Includes quick-disconnect battery clamps, ring terminals and 3-pin XLR 3-12C cables. Bright LED indicators define the charger mode. A multi-stage charging algorithm offers a safe start, reverse polarity and short circuit protection. The charger will not apply current to the battery clamps until they are properly connected. Maintenance mode monitors the battery voltage to keep it fully charged. Schumacher has a patent pending for the “thermal runaway” protection. The temperature controlled cooling fan offers efficient operation and peak performance. A heavy duty aluminum case weighs less than 2 pounds. The unit charges 24 volt lead-acid, AGM and gel cell batteries. It is UL/CUL approved. Perfect for mobilized wheelchairs, electric scooters, hospital beds and other battery powered devices with hard-to-access batteries.

Schumacher EC-25 25' Cable Connector Extension Cord

Schumacher EC-25 25' Cable Connector Extension Cord Review

Schumacher EC-25 25' Cable Connector Extension Cord Feature

• 25 feet of extension cord
• 18 gauge cord
• Protective caps on both ends
• Use with Schumacher maintainers and trickle chargers
• Very user-friendly

Schumacher 25' Cable Connector Extension Cord used with Schumacher maintainers/trickle chargers to power your car, boat, ATV, motorcycle, and power sports vehicles. When using this cord, you no longer have to leave the battery charger on the ground, or in other awkward positions while it is in use. Place the charger in a sturdy position, and use the 25-feet of extension cord to connect the clamps to where the battery is located. You wont lose any charging power, and the 28 gauge cable is durable to stand up against difficult conditions. This unit also comes with protective caps on both ends of the cord, to ensure user-safety and product durability.

Schumacher SC-1000A SpeedCharge 10/6/2 Amp Charger/Maintainer/Tester

Schumacher SC-1000A SpeedCharge 10/6/2 Amp Charger/Maintainer/Tester Review

Schumacher SC-1000A SpeedCharge 10/6/2 Amp Charger/Maintainer/Tester Feature

• Fully automatic and microprocessor controlled
• Choose between a 10, 6, or 2 Amp charge
• 50 Amp clamps used for top and side-mounted battery posts
• Easy-to-use electronic push button controls

The Schumacher Speed Charge SC-1000A is fully automatic and microprocessor controlled. It has three charge settings of 10, 6, and 2 Amps. For the 10 Amp Fast Charge, the charger monitors battery condition and adjusts charge rate downward to prevent battery damage. This setting is best for car, light truck, marine, RV, farm equipment, AGM, gel cell and deep-cycle batteries. The 6 Amp Medium Charge has a self-adjusting charge rate for everyday charging needs and for keeping your battery in peak condition. The 2 Amp Slow Charge is for charging and maintaining small batteries, such as motorcycle, ATV, snowmobile and lawn tractor batteries. The unit has 50 Amp clamps, used for top and side-mounted battery posts. Electronic push button controls allow for easy selection of charge rate or battery type. Battery type selections include regular automotive, deep-cycle, AGM or gel cell batteries. The charger has a sturdy, built-in handle for easy portability, and which also serves as a convenient cord wrap. 5 year limited warranty.